Monitoring And Maintaining Survivable Remote Site Telephony - Cisco WS C4224V 8FXS - 200Mbps Ethernet Switch Software Configuration Manual

Chapter 8 Configuring Survivable Remote Site Telephony
Command
debug ephone pak
debug ephone raw
Monitoring and Maintaining Survivable Remote Site
Telephony
Command
C4224# show run
C4224# show call-manager-fallback
all
C4224# show call-manager-fallback
dial-peer
C4224# show call-manager-fallback
ephone-dn
C4224# show call-manager-fallback
voice-port
C4224# show ephone
C4224# show ephone-dn
C4224# show ephone summary
C4224# show voice port summary
C4224# show dial-peer voice summary
OL-2031-02
Purpose
Provides voice packet level debugging and prints the contents
of one voice packet in every 1024 voice packets.
Provides raw low-level protocol debugging display for all
Skinny Client Control Protocol messages.
Use the following commands to monitor and maintain the Catalyst 4224 with the
SRST feature:
Purpose
Displays the configuration.
Displays the detailed configuration of all the
Cisco IP Phones, voice ports, and dial peers of the SRST
Catalyst 4224.
Displays the output of the dial peers of the SRST
Catalyst 4224.
Displays the Cisco IP Phone destination number.
Displays output for the voice ports.
Displays Cisco IP Phone output.
Displays the Cisco IP Phone destination number.
Displays a summary of the Cisco IP Phone output.
Displays a summary of all voice ports.
Displays a summary of all voice dial peers.
Catalyst 4224 Access Gateway Switch Software Configuration Guide

Monitoring and Maintaining Survivable Remote Site Telephony

8-11