Application Notes
Layer 3 QoS
WAN QoS Queuing and Scheduling
Summary of the Layer 3 WAN QoS Features
Catalyst 4224 Access Gateway Switch Software Configuration Guide
1-16
Similar to other voice-enabled Catalyst platforms, the Catalyst 4224 learns that an
IP phone is attached to the port via the CDP message exchange.
You can configure QoS on the Layer 3 CPU from the CLI, which is very similar
to the interface on the Cisco 1750, Cisco 2600 series, and Cisco 3600 series
routers.
The Catalyst 4224 supports WAN QoS queuing and scheduling.
Catalyst 4224 WAN QoS queuing and scheduling features.
Table 1-4
Catalyst 4224 WAN QoS Queuing and Scheduling Features
Frame Relay
MLPPP
No LLQ/CBWFQ No LLQ/CBWFQ LLQ/CBWFQ
IP RTP Priority
No IP RTP
Priority
FRF.12
LFI
The Service Policy command is disabled for Frame Relay.
In summary, the Catalyst 4224 supports the following Cisco IOS Layer 3 WAN
QoS features:
Classification and Marking
•
Access control lists (ACL)
–
Class-based marking
–
Class-based matching
–
Committed Access Rate (CAR)
–
Chapter 1
PPP
HDLC
LLQ/CBWFQ
IP RTP Priority
IP RTP Priority
with CBWFQ
Product Overview
Table 1-4
shows
OL-2031-02