Table of Contents
Advertisement
Chapter 12
Configuring Other Routing Protocols
LAN Support
VLAN Support
Multilayer Switching Support
IPX Configuration
OL-2031-02
Cisco IOS software supports routing IPX between Ethernet-emulated LANs and
Token Ring-emulated LANs. For more information on emulated LANs and
routing IPX between them, refer to the "Configuring LAN Emulation" chapter of
the Cisco IOS Switching Services Configuration Guide.
Cisco IOS software supports routing IPX between VLANs. Users with Novell
NetWare environments can configure any one of the four IPX Ethernet
encapsulations to be routed using ISL encapsulation across VLAN boundaries.
For more information on VLANs and routing IPX between them over ISL, refer
to the "Configuring Routing Between VLANs with ISL Encapsulation" chapter of
the Cisco IOS Switching Services Configuration Guide.
Cisco IOS software supports IPX Multilayer Switching (MLS). For more
information on IPX MLS, refer to the "Multilayer Switching" chapter of the Cisco
IOS Switching Services Configuration Guide.
For details on how to configure IPX protocol, refer to the following
documentation, available online at Cisco.com:
Cisco IOS AppleTalk and Novell IPX Configuration Guide, Release 12.2
•
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fatipx_c/index.htm
Cisco IOS AppleTalk and Novell IPX Command Reference, Release 12.2
•
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fatipx_r/index.htm
Catalyst 4224 Access Gateway Switch Software Configuration Guide
Novell IPX
12-3
Advertisement
Table of Contents
Troubleshooting
