Chapter 3 Configuring Ethernet Switching; Configuring The Catalyst 4224 For Cisco Ip Telephony - Cisco WS C4224V 8FXS - 200Mbps Ethernet Switch Software Configuration Manual

Configuring the Catalyst 4224 for Cisco IP Telephony

OL-2031-02
Configuring Ethernet Switching
This section describes the Ethernet switching capabilities of the Catalyst 4224.
These capabilities are designed to work as part of the Cisco IP Telephony
solution.
This section also outlines how to configure Ethernet ports on the Catalyst 4224 to
support IP phones in a branch office on your network.
This section contains the following topics:
Configuring the Catalyst 4224 for Cisco IP Telephony, page 3-1
•
Configuring Ethernet Ports to Support IP Phones and a Daisy-Chained
•
Workstation, page 3-3
Configuring Ethernet Ports to Support IP Phones with Multiple Ports,
•
page 3-9
Managing the Catalyst 4224 Access Gateway Switch, page 3-10
•
The Catalyst 4224 has 24 10/100 switched Ethernet ports with integrated inline
power and Quality of Service (QoS) features. These features allow you to extend
Voice-over-IP (VoIP) networks to small branch offices.
As an access gateway switch, the Catalyst 4224 can be deployed as a component
of a centralized call processing network using a centrally deployed
Cisco CallManager. Instead of deploying and managing key systems or PBXs in
small branch offices, applications are centrally located at the corporate
headquarters or data center and are accessed via the IP WAN.
Catalyst 4224 Access Gateway Switch Software Configuration Guide
C H A P T E R
3
3-1