Configuring Ip Fabric For Media; Prerequisites; Guidelines And Limitations - Cisco Nexus 9200 Series Manual

Configuring IP Fabric for Media

This chapter describes how to configure the Cisco Nexus 9200 Series switches for Cisco's IP fabric for media
solution.
•
•
•
•
•
•

Prerequisites

Cisco's IP fabric for media solution has the following prerequisites:
• The Cisco Nexus 9200 Series switches must be running Cisco NX-OS Release 7.0(3)I4(2) or a later
• TCAM carving must be configured on the spine switch and each leaf switch using the hardware

Guidelines and Limitations

Cisco's IP fabric for media solution has the following guidelines and limitations:
• Only the Cisco Nexus 9236C and 9272Q can be spine switches.
• Only the Cisco Nexus 9236C, 9272Q, and 92160YC-X can be leaf switches.
Prerequisites, page 11
Guidelines and Limitations, page 11
Configuring NBM, page 12
Configuring PTP for Media, page 15
Configuration Example, page 18
Related Documentation, page 18
release.
access-list tcam region ing-ifacl 2048 command. The following example shows how you might provision
the TCAM. For more information on TCAM carving, see the
Configuration Guide.
hardware access-list tcam region ing-l2-qos 0
hardware access-list tcam region ing-l3-vlan-qos 256
hardware access-list tcam region ing-racl 256
hardware access-list tcam region ing-ifacl 2048
Cisco Nexus 9000 Series NX-OS IP Fabric for Media Solution Guide, Release 7.0(3)I4(2)
4
C H A P T E R
Cisco Nexus 9000 Series NX-OS Security
11