Table of Contents
Advertisement
Conversion Prerequisites
Conversion Prerequisites
The following upgrade kits need to be installed on your system prior to beginning these
conversion procedures:
•
•
Required Tools and Equipment
Table 1 lists the tools and equipment that are required to convert from a Cisco 6130 with NI-1 card
system to a Cisco 6130 with NI-2 card system.
Table 1
Check
Cisco 6130 NI-1 to NI-2 Upgrade Kit Conversion Procedures
2
Cisco 6130 Thermal Upgrade Kit (Part number 6130-THERMAL-UPGD)—Necessary to ensure
that your Cisco 6130 chassis can accommodate higher-density line cards (for example, 4xflexi line
cards). The following components of the thermal upgrade kit need to be installed:
–
Cisco 6130 chassis ventilation cover
New power rating label
–
Direct Connect NEBS Compliance Kit (Part number 6100-NU-01)—Necessary to ensure that your
Cisco 6130 chassis is compliant for a Direct Connect configuration.
Ferrites on the power connections cables
–
Thermal shield
–
Tool and Equipment Requirements Checklist
Tools and Equipment
Hardware Components
Cisco 6100 NI-1 to NI-2 Upgrade Kit
System I/O card for NI-2 system
•
Plastic ESD shield
–
Component safety shield
–
EMI cover and cover bracket
–
Fan tray alarm cable (part number 72-1912-01)
•
•
Cisco 6130 chassis front cover
•
Lexan shield for Cisco 6100 chassis backplane
•
Cisco NI-1 to NI-2 Line Card Upgrade Utility CD
NI-2 card (DS3 or OC-3)
Two blank faceplates
Tools
A 3/16-inch flat-head screwdriver
A Phillips-head screwdriver
A one-quarter inch socket driver or wrench
Necessary equipment for ESD protection—Required whenever you handle Cisco
DSLAM equipment, which includes the chassis and cards
Standoff screws
78-10709-03
Advertisement
Table of Contents
