Using The Cisco Ios Cli - Cisco WS C4224V 8FXS - 200Mbps Ethernet Switch Software Configuration Manual

Chapter 2 Configuring for the First Time

Using the Cisco IOS CLI

OL-2031-02
Figure 2-1 Catalyst 4224 Front Panel
1 2 3 4 5
VWIC 1 VWIC 2
STATUS
ACCESS GATEWAY SWITCH
Status LED
VWIC
(slots 1 and 2)
Cisco voice gateways run versions of Cisco IOS software that includes
specialized adaptations for Voice over IP (VoIP) and Media Gateway Control
Protocol (MGCP). If you are familiar with other versions of Cisco IOS, you will
find configuring Cisco voice gateways straightforward because you will use the
Cisco IOS CLI, with which you are familiar.
If you have never used the Cisco IOS CLI, you should still be able to perform the
configuration required using the instructions and examples provided in this guide.
To help get you started, this section provides a brief overview of some of the main
features of the CLI. For further information, refer to the Cisco IOS configuration
guides and command references for details about specific commands.
This section contains the following topics:
Getting Help, page 2-6
•
Command Modes, page 2-6
•
Disabling a Command or Feature, page 2-8
•
Saving Configuration Changes, page 2-8
•
Catalyst 4224 Access Gateway Switch Software Configuration Guide
10/100 Ethernet (slot 5)
6 7 8
9 10 11 12 13
VIC 3
Switch
utilization
VIC
(slot 3)
Using the Cisco IOS CLI
14 15 16 17 18 19 20 21
CONSOLE
0 4
1 5
2 6
3 7
WS-U4604-8FXS
HDA
STATUS
10/100 Mgt port 8-Port RJ21 FXS
(slot 4)
CATALYST 4224
22 23 24
PS RPS
2-5