Chapter 2 Configuring For The First Time; Chapter 4 Configuring The Data Interface; C H A P T E R 5 Configuring The Voice Interfaces - Cisco WS C4224V 8FXS - 200Mbps Ethernet Switch Software Configuration Manual

Audience
Audience
Organization
Catalyst 4224 Access Gateway Switch Software Configuration Guide
xviii
This guide is intended for network administrators, engineers, and managers who
need to understand the Catalyst 4224 system or configure the software. It is also
intended for Cisco customer service representatives and system engineers.
This guide contains the following chapters:
Title
Chapter 1 Product Overview
Chapter 2 Configuring for the First
Time
Chapter 3 Configuring Ethernet
Switching
Chapter 4 Configuring the Data
Interfaces
Chapter 5 Configuring the Voice
Interfaces
Chapter 6 Configuring VoIP
Chapter 7 Configuring the
Eight-Port FXS RJ-21
Module
Chapter 8 Configuring Survivable
Remote Site Telephony
Chapter 9 Implementing Fax over
IP on Cisco Voice
Gateways
Description
Provides an overview of the
Catalyst 4224 Access Gateway
Switch software features.
Describes the initial steps of
configuring the Catalyst 4224.
Describes how to configure the
Ethernet ports and voice VLANs.
Describes how to configure the data
interfaces for IP WAN routing.
Describes how to configure key
voice interfaces.
Provides comprehensive
information on Cisco VoIP
configuration.
Describes how to configure the
8-Port FXS Module.
Describes how to configure
survivable remote site telephony.
Provides an overview and
configuration information for fax
over IP technologies supported on
Cisco voice gateways.
Preface
OL-2031-02