interface range
Syntax
OL-2031-02
Command Reference for Voice VLAN
This section provides reference information for the following voice VLAN
commands:
interface range, page A-1
•
interface vlan, page A-3
•
monitor session, page A-4
•
spanning-tree, page A-6
•
spanning-tree portfast, page A-7
•
switchport access, page A-8
•
switchport voice vlan, page A-10
•
The interface range command allows you to configure multiple interfaces with
the same configuration parameters. By using this command, you enter range
configuration mode. While you are in this mode, the command parameters that
you enter are attributed to all interfaces within the range specified.
interface range {{ethernet | fastethernet} slot/interface - interface}
[, {{ethernet | fastethernet} slot/interface - interface}]
Catalyst 4224 Access Gateway Switch Software Configuration Guide
A P P E N D I X
A
A-1