Dell PowerConnect 5424 User Manual page 299

• Address Aging (10-630) — Specifies the amount of time the MAC Address remains in the Dynamic
Address Table before it is timed out if no traffic from the source is detected. The default value is
300 seconds.
• Interface — Specifies the interface for which the table is queried. There are two interface types from
which to select.
– Port — Specifies the port numbers for which the table is queried.
– LAG — Specifies the LAG for which the table is queried.
• MAC Address — Specifies the MAC address for which the table is queried.
• VLAN ID — Specifies the VLAN ID for which the table is queried.
• Address Table Sort Key — Specifies the means by which the Dynamic Address Table is sorted.
Redefining the Aging Time
1 Open the Dynamic Address Table.
2 Define the Aging Time field.
3 Click Apply Changes.
The aging time is modified, and the device is updated.
Querying the Dynamic Address Table
1 Open the Dynamic Address Table.
2 Define the parameter by which to query the Dynamic Address Table.
Entries can be queried by Port, MAC Address, or VLAN ID.
3 Click Query.
The Dynamic Address Table is queried.
Sorting the Dynamic Address Table
1 Open the Dynamic Address Table.
2 From the Address Table Sort Key drop-down menu, select whether to sort addresses by address,
VLAN ID, or interface.
3 Click Query.
The Dynamic Address Table is sorted.
Configuring Device Information
299