The following is an example of the CLI commands:
console> enable
console# configure
console (config)# ip domain-name www.dell.com
Mapping Domain Host
The Host Name Mapping page provides parameters for assigning static host names IP addresses.
The Host Name Mapping page provides up to eight IP addresses per host. To open the Host Name
Mapping page, click System → IP Addressing → Host Name Mapping.
Figure 6-41. Host Name Mapping
•
Host Name — Contains a Host Name list. Host Name are defined in the Add Host Name Mapping
page. Each host provides up to eight IP address. The field values for the Host Name field are:
•
IP Address (X.X.X.X) — Provides up to eight IP addresses that are assigned to the specified host name.
•
Type — The IP address type. The possible field values are:
–
Dynamic — The IP address was created dynamically.
–
Static — The IP address is a static IP address.
•
Remove Host Name — When checked, removes the DNS Host Mapping.
136
Configuring System Information