Dell PowerConnect 5424 User Manual page 332

• Frame Type — Packet type accepted on the port. Possible values are:
– Admit Tag Only — Only tagged packets are accepted on the port.
– Admit All — Both tagged and untagged packets are accepted on the port.
• Ingress Filtering — Enables or disables Ingress filtering on the port. Ingress filtering discards packets
that are destined to VLANs of which the specific LAG is not a member.
• Current Reserve VLAN — The VLAN currently designated by the system as the reserved VLAN.
• Reserve VLAN for Internal Use — The VLAN selected by the user to be the reserved VLAN if not in
use by the system.
Assigning Port Settings
1 Open the VLAN Port Settings page.
2 Select the port to which settings need to be assigned from the Port drop-down menu.
3 Complete the remaining fields on the page
4 Click Apply Changes.
The VLAN port settings are defined, and the device is updated.
Displaying the VLAN Port Table
1 Open the VLAN Port Settings page.
2 Click Show All.
The VLAN Port Table opens.
Figure 7-43. VLAN Port Table
332
Configuring Device Information