Starting and Configuring the Device
After completing all external connections, connect a terminal to the device to configure the device
and for other procedures. For initial configuration, the standard device configuration is performed.
NOTE:
Before proceeding, read the release notes for this product. The release notes can be downloaded
from www.support.dell.com.
Figure 4-1. Installation and Configuration Flow
Press Esc
Startup Menu (Special
Functions)
Reboot
Connect Device and
Console
Power On
Yes
Susepnd
Bootup
No
Loading Program from
flash to RAM
Yes
Enter Wizard
No
Initial Configuration:
IP Address, Subnet
mask, Users Basic
Security Configuration
Advanced Configuration:
IP Address from DHCP ,
IP address from bootp,
Security Management
Hardware
Setup
Standard
Device
Installation
Wizard Configuration
Process
Advanced
Device
Installation
Starting and Configuring the Device
39