Dell PowerConnect 5424 User Manual page 114

Modifying a DHCP IPv4 Interface
1 Open the DHCP IPv4 Interface page.
2 Modify the fields.
3 Click Apply Changes.
The entry is modified, and the device is updated.
Deleting a DHCP IPv4 Interface
1 Open the DHCP IPv4 Interface page.
2 Click Show All.
The DHCP IPv4 Interface Table opens.
3 Select a DHCP client entry.
4 Select the Remove check box.
5 Click Apply Changes.
The selected entry is deleted, and the device is updated.
Defining DHCP IPv4 Interfaces Using CLI Commands
The following table summarizes the equivalent CLI commands for defining DHCP clients.
Table 6-18. DHCP IPv4 Interface CLI Commands
CLI Command
ip address dhcp
hostname host-name
[
The following is an example of the CLI command:
console> enable
console# config
console (config#) interface ethernet g1
console (config-if)# ip address dhcp 10.0.0.1 /8
114
Configuring System Information
Description
To acquire an IP address on an Ethernet interface from the
Dynamic Host Configuration Protocol (DHCP).
]