Dell PowerConnect 5424 User Manual page 174

Displaying the TACACS+ Table
1 Open the TACACS+ Settings page.
2 Click Show All.
The TACACS+ Table opens:
Figure 6-66. TACACS+ Table
Removing a TACACS+ Server
1 Open the TACACS+ Settings page.
2 Click Show All.
The TACACS+ Table opens.
3 Select a TACACS+ Table entry.
4 Select the Remove check box.
5 Click Apply Changes.
The TACACS+ server is removed, and the device is updated.
Defining TACACS+ Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
TACACS+ Settings page.
Table 6-37. TACACS+ CLI Commands
CLI Command
TACACS-server host (ip-address | hostname)
[single-connection] [port port-number] [timeout
timeout] [key key-string] [source source] [priority
priority]
no TACACS-server host (ip-address | hostname) Deletes a TACACS+ host.
174
Configuring System Information
Description
Specifies a TACACS+ host.