Adding Bridge Multicast Address Members - Dell PowerConnect 5424 User Manual

Adding Bridge Multicast Address Members

The Bridge Multicast Group page displays the ports and LAGs attached to the Multicast service group
in the Ports and LAGs tables. The Port and LAG tables also reflect the manner in which the port or
LAGs joined the Multicast group. Ports can be added either to existing groups or to new Multicast
service groups. The Bridge Multicast Group page permits new Multicast service groups to be created.
The Bridge Multicast Group page also assigns ports to a specific Multicast service address group.
To open the Bridge Multicast Group page, click Switch→ Multicast Support→ Bridge Multicast Address
in the tree view.
Figure 7-56. Bridge Multicast Group
• VLAN ID — Identifies a VLAN and contains information about the Multicast group address.
• Bridge Multicast Address — Identifies the Multicast group MAC address/IP address.
• Remove — When selected, removes a Bridge Multicast address.
• Ports — Port that can be added to a Multicast service.
• LAGs — LAGs that can be added to a Multicast service.
358
Configuring Device Information