Dell PowerConnect 5424 User Manual page 348

Configuring Port Settings
1 Open the Voice VLAN Port Settings page.
2 Select a port or LAG.
3 Modify the fields as desired.
4 Click Apply Changes.
The settings are modified and the device is updated.
Displaying the Port Setting Table
1 Open the Voice VLAN Port Settings page.
2 Click Show All. The Port Setting Table opens.
Figure 7-50. Voice VLAN Port Setting Table
The Voice VLAN Port Setting Table includes the Membership field which indicates if the Voice VLAN
member is a static or dynamic member. The field value Dynamic indicates the VLAN membership
was dynamically created through GARP. The field value Static indicates the VLAN membership is
user-defined.
3 Modify the fields as desired.
4 Click Apply Changes.
Defining Voice VLAN Port Settings Using CLI Commands
The following table summarizes the equivalent CLI command for defining Voice VLAN port settings .
Table 7-34. Voice VLAN Port Settings
CLI Command
voice vlan secure
no voice vlan secure
348
Configuring Device Information
CLI Commands
Description
Use the voice vlan secure interface configuration
command to configure the secure mode for the voice
VLAN. Use the no form of this command to disable the
secure mode.