Viewing Counter Summary - Dell PowerConnect 5424 User Manual

• % Interface Utilization — Network interface utilization percentage based on the duplex mode of the
interface. The range of this reading is from 0 to 200%. The maximum reading of 200% for a full duplex
connection indicates that 100% of bandwidth of incoming and outgoing connections is used by the
traffic travelling through the interface. The maximum reading for a half duplex connection is 100%.
• % Unicast Received — Percentage of Unicast packets received on the interface.
• % Non Unicast Packets Received — Percentage of non-Unicast packets received on the interface.
• % Error Packets Received — Number of packets with errors received on the interface.
• Global System LAG — Current LAG/trunk performance.

Viewing Counter Summary

The Counter Summary page contains statistics for port utilization in numeric sums as opposed to
percentages. To open the Counter Summary page, click Statistics/RMON→ Table Views→ Counter
Summary in the tree view.
Figure 8-2. Counter Summary
• Refresh Rate — The amount of time that passes before the interface statistics are refreshed.
• Interface — The interface number.
• Interface Status — The interface status.
• Received Unicast Packets — Number of received Unicast packets on the interface.
• Received Non Unicast Packets — Number of received non-Unicast packets on the interface.
• Transmit Unicast Packets — Number of transmitted Unicast packets from the interface.
376
Viewing Statistics