Dell PowerConnect 5424 User Manual page 364

Attaching a Port to a Multicast Router or Switch
1 Open Bridge Multicast Forward All page.
2 Define the VLAN ID field.
3 Select a port in the Ports table, and assign the port a value.
4 Click Apply Changes.
The port is attached to the Multicast router or switch.
Attaching a LAG to a Multicast Router or Switch
1 Open Bridge Multicast Forward All page.
2 Define the VLAN ID field.
3 Select a port in the LAGs table, and assign the LAG a value.
4 Click Apply Changes.
The LAG is attached to the Multicast router or switch.
Managing LAGs and Ports Attached to Multicast Routers Using CLI Commands
The following table summarizes the equivalent CLI commands for managing LAGs and ports attached
to Multicast routers as displayed on the Bridge Multicast Forward All page.
Table 7-40. CLI Commands for Managing LAGs and Ports Attached to Multicast Routers
CLI Command
show bridge multicast filtering
vlan-id
no bridge multicast forbidden
forward-all
bridge multicast forward-all
{add | remove} {ethernet
interface-list | port-channel
port-channel-number-list}
364
Configuring Device Information
Description
Displays the Multicast filtering
configuration.
Disables forwarding Multicast packets on
a port.
Enables forwarding of all Multicast
packets on a port. Use the no form of this
command to return to default.