Interface Configuration Mode - Dell PowerConnect 5424 User Manual

The following example illustrates how to access Global Configuration Mode and return back to the
Privileged EXEC Mode:
console#
console#configure
console(config)#exit
console#

Interface Configuration Mode

Interface configuration commands modify specific IP interface settings, including bridge-group,
description, etc.
VLAN Database Mode
The VLAN mode contains commands to create and configure a VLAN as a whole, for example, to create
a VLAN and apply an IP address to the VLAN. The following is an example of the VLAN mode prompt:
Console # vlan database
Console (config-vlan)#
Port Channel Mode
The Port Channel mode contains commands for configuring Link Aggregation Groups (LAG).
The following is an example of the Port Channel mode prompt:
Console (config)# interface port-channel 1
Console (config-if)#
Interface Mode
The Interface mode contains commands that configure the interface. The Global Configuration mode
command interface ethernet is used to enter the interface configuration mode. The following is
an example of the Interface mode prompt:
console> enable
console# configure
console(config)# interface ethernet g18
console(config-if)#
Management Access List
The Management Access List mode contains commands to define management access-lists. The Global
Configuration mode command management access-list is used to enter the Management Access
List Configuration mode.
65
Using Dell OpenManage Switch Administrator