Dell PowerConnect 5424 User Manual page 140

• Global Settings — Select this option to activate the fields for ARP global settings.
• ARP Entry Age Out (1-40000000) — For all devices, the amount of time (seconds) that passes
between ARP requests about an ARP table entry. After this period, the entry is deleted from the table.
The range is 1 - 4000000, where zero indicates that entries are never cleared from the cache.
The default value is 60000 seconds.
• Clear ARP Table Entries — The type of ARP entries that are cleared on all devices. The possible
values are:
– None — ARP entries are not cleared.
– All — All ARP entries are cleared.
– Dynamic — Only dynamic ARP entries are cleared.
– Static — Only static ARP entries are cleared.
• ARP Entry — Select this option to activate the fields for ARP settings on a single device.
• Interface — The interface number of the port, LAG, or VLAN that is connected to the device.
• IP Address — The station IP address, which is associated with the MAC address filled in below.
• MAC Address — The station MAC address, which is associated in the ARP table with the IP address.
• Status — The ARP Table entry status. Possible field values are:
– Dynamic — The ARP entry is learned dynamically.
– Static — The ARP entry is a static entry.
• Remove ARP Entry — When selected, removes an ARP entry.
Adding a Static ARP Table Entry:
1 Open the ARP Settings page.
2 Click Add.
The Add ARP Entry page opens:
Figure 6-45. Add ARP Entry Page
3 Select an interface.
140
Configuring System Information