Dell PowerConnect 5424 User Manual page 106

New Log Server IP Address — Defines the IP address of the new Log Server.
3 Define the fields.
4 Click Apply Changes.
The server is defined and added to the Available Servers list.
Displaying the Remote Log Servers Table:
1 Open the Remote Log Server Settings page.
2 Click Show All.
The Remote Log Servers Table page opens:
Figure 6-21. Remote Log Servers Table
Removing a Log Server from the Log Server Table Page:
1 Open the Remote Log Server Settings page.
2 Click Show All.
The Remote Log Servers Table page opens.
3 Select a Remote Log Servers Table entry.
4 Select the Remove check box to remove the server(s).
5 Click Apply Changes.
The Remote Log Servers Table entry is removed, and the device is updated.
Working with Remote Server Logs Using the CLI Commands
The following table summarizes the equivalent CLI command for working with remote server logs.
Table 6-15. Remote Log Server CLI Commands
CLI Command
logging (ipv4-address|ipv6-addres |hostname) [port port]
[severity level] [facility facility] description text]
no logging
show logging
106
Configuring System Information
Description
Logs messages to a remote server.
Deletes a syslog server.
Displays the state of logging and the syslog messages.