Dell PowerConnect 5424 User Manual page 138

Displaying the Hosts Name Mapping Table
1 Open the Host Name Mapping page.
2 Click Show All.
The Hosts Name Mapping Table opens:
Figure 6-43. Hosts Name Mapping Table
Removing Host Name from IP Address Mapping
1 Open the Host Name Mapping page.
2 Click Show All
3 The Host Mapping Table opens.
4 Select a Host Mapping Table entry.
5 Check the Remove checkbox.
6 Click Apply Changes.
The Host Mapping Table entry is deleted, and the switch device is updated.
Mapping IP address to Domain Host Names Using the CLI Commands
The following table summarizes the equivalent CLI commands for mapping Domain Host names to
IP addresses.
Table 6-26. Domain Host Name CLI Commands
CLI Command
ip host name address1 [address2 ... address8]
no ip host name
ipv6 host name ipv6-address1 [ipv6-address2 ...
ipv6-address8]
no ipv6 host name
138
Configuring System Information
Description
Defines the static host name-to-address mapping in the host
cachefor IPv4.
Removes the name-to-address mapping for IPv4.
Defines the static host name-to-address mapping in the host
cache for IPv6.
Removes the name-to-address mappingfor IPv6.