Viewing The Rmon History Table - Dell PowerConnect 5424 User Manual

Modifying a History Control Table Entry
1 Open the RMON History Control page.
2 Select an entry in the History Entry No. field.
3 Modify the fields as required.
4 Click Apply Changes.
The table entry is modified, and the device is updated.
Deleting a History Control Table Entry
1 Open the RMON History Control page.
2 Select an entry in the History Entry No. field.
3 Click Remove.
4 Click Apply Changes.
The selected table entry is deleted, and the device is updated.
Viewing RMON History Control Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing GVRP statistics.
Table 8-6. RMON History CLI Commands
CLI Command
rmon collection history index
[ owner ownername
bucket-number interval
] [
seconds ]
show rmon collection history
ethernet interface
[
channel port-channel-number
The following is an example of the CLI commands:
Console (config)# interface ethernet g8
Console (config-if)# rmon collection history 1 interval 2400
Console (config-if)# exit
Console (config)# exit

Viewing the RMON History Table

The RMON History Table contains interface specific statistical network samplings. Each table entry
represents all counter values compiled during a single sample. To open the RMON History Table,
click Statistics/RMON→ RMON→ History Table in the tree view.
394
Viewing Statistics
Description
Enables and configures RMON on an
| buckets interface.
Displays RMON collection history
| port- statistics.
]