Dell PowerConnect 5424 User Manual page 283

The following is an example of the CLI commands:
Console (config)# interface ethernet g5
Console (config-if)# description RD SW#3
Console (config-if)# shutdown
Console (config-if)# no shutdown
Console (config-if)# speed 100
Console (config-if)# duplex full
Console (config-if)# negotiation
Console (config-if)# back-pressure
Console (config-if)# flowcontrol on
Console (config-if)# mdix auto
Console (config-if)# exit
Console (config)# exit
Console# show interfaces configuration ethernet g5
Port Type Duplex
---- ----- ------
g5 1G Full
console#
console# show interfaces status ethernet g5
Port Type Duplex
---- ----- ------
g5 1G Full
console#
Speed Neg
------ ----
100 Enabled On
Speed Neg
------ ----
100 Enabled On
Flow Admin
Control State
------ -----
Up
Flow Link
Control State
------ -----
Up
Configuring Device Information
Back Mdix
Pressure
Mode
------ ----
Enable Auto
Back Mdix
Pressure Mode
------ ----
Disabled on
283