Displaying the Multiple Hosts Table
1 Open the Multiple Hosts page.
2 Click Show All.
The Multiple Hosts Table opens:
Figure 7-4. Multiple Hosts Table
Enabling Multiple Hosts Using the CLI Commands
The following table summarizes the equivalent CLI commands for enabling the advanced port based
authentication as displayed in the Multiple Hosts page.
Table 7-2. Multiple Hosts CLI Commands
CLI Command
dot1x multiple-hosts
dot1x single-host-
violation {forward
|discard |discard-
second s]
shutdown}[trap
250
Configuring Device Information
Description
Allows multiple hosts (clients) on an 802.1X-
authorized port that has the dot1x port-control
interface configuration command set to auto.
Configures the action to be taken when a station,
whose MAC address is not the client (supplicant)
MAC address, attempts to access the interface.