Dell PowerConnect 5424 User Manual page 152

Viewing the Profile Rules Table:
The order in which rules appear in the Profile Rules Table is important. Packets are matched to the first
rule which meets the rule criteria.
1 Open the Access Profiles page.
2 Click Show All.
The Profile Rules Table Page opens:
Figure 6-52. Profile Rules Table Page
Removing a Rule
1 Open the Access Profiles page.
2 Click Show All.
The Profile Rules Table opens.
3 Select a rule.
4 Select the Remove check box.
5 Click Apply Changes.
The selected rule is deleted, and the device is updated.
Defining Access Profiles Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the Access
Profiles page.
Table 6-30. Access Profiles CLI Commands
CLI Command
management access-list name
permit [ethernet interface-number | vlan vlan-id | port-
channel number] [service service]
152
Configuring System Information
Description
Defines an access-list for management, and enters the
access-list context for configuration.
Sets port permitting conditions for the management
access list.