Removing a Filter
1 Open the Notification Filter page.
2 Click Show All. The Filter Table opens.
3 Select a Filter Table entry.
4 Check the Remove checkbox. The filter entry is deleted, and the device is updated.
Configuring Notification Filters Using CLI Commands
The following table summarizes equivalent CLI commands for defining fields displayed in the
Notification Filters page.
Table 6-45. SNMP Notification Filter CLI Commands
CLI Command
snmp-server filter
filter-name oid-tree
{included | excluded}
show snmp filters
[ filtername ]
The following is an example of CLI commands:
Console (config)# snmp-server filter user1 iso included
Console(config)# end
Console # show snmp filters
Name
-----------
user1
Defining SNMP Notification Recipients
The Notification Recipients page contains information for defining filters that determine whether traps
are sent to specific users, and the trap type sent. SNMP notification filters provide the following services:
•
Identifying Management Trap Targets
•
Trap Filtering
•
Selecting Trap Generation Parameters
•
Providing Access Control Checks
To open the Notification Recipients page, click System
tree view.
214
Configuring System Information
Description
Creates or updates an SNMP notification filter.
Displays the configuration of SNMP
notification filters.
OID Tree
-------------
iso
Type
--------
Included
→
→
SNMP
Notification Recipient in the