Querying and Sorting Dynamic Addresses Using CLI Commands
The following table summarizes the equivalent CLI commands for querying and sorting dynamic
addresses as displayed in the Dynamic Address Table.
Table 7-17. Query and Sort CLI Commands
CLI Command
bridge aging-time seconds Sets the address table aging time.
show bridge address-table
[vlan vlan ] [ethernet
interface | port-channel
port-channel-number ]
The following is an example of the CLI commands:
Console (config)# bridge aging-time 250
Console (config)# exit
Console# show bridge address-table
Aging time is 250 sec
vlan
mac address
----
-----------
1
00:60:70:4C:73:FF
1
00:60:70:8C:73:FF
200
00:10:0D:48:37:FF
300
Configuring Device Information
Description
Displays classes of dynamically created
entries in the bridge-forwarding database.
port
type
----
----
g8
dynamic
g8
dynamic
g8
static