Defining Iscsi Targets Using Cli Commands - Dell PowerConnect 5424 User Manual

3 Fill in the parameters.
4 Click Apply Changes.
Removing Targets
1 Open the iSCSI Targets Table.
2 In the table, check the Remove checkbox next to each target to be removed.
3 Click Apply Changes.

Defining iSCSI Targets Using CLI Commands

The following table summarizes the equivalent CLI commands for defining fields displayed in the iSCSI
Targets Table.
Figure 6-110. iSCSI Targets Table CLI Commands
CLI Command
iscsi target port
tcp-port-1 [ tcp-
port-2... tcp-port-8 ]
[address ip-address ]
[name targetname ]
no iscsi target port
tcp-port-1 [ tcp-port-
2... tcp-port-8 ]
[address ip-address ]
show iscsi sessions
Description
To configure iSCSI port/s, target address and
name, use the iscsi target port command in
global configuration mode. To delete iSCSI
port/s, target, use the no form of this command.
To delete iSCSI port/s, target, use this no form
of the command.
Show the current iSCSI sessions.
Configuring System Information
237