Defining iSCSI Global Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the iSCSI
Global Parameters page.
Figure 6-106. iSCSI Global Parameters CLI Commands
CLI Command
iscsi enable
no iscsi enable
iscsi cos {up vpt |
dscp dscp } [remark]
[bandwidth flow-
bandwidth ]
[burstsize flow-
burstsize ]
no iscsi cos
iscsi aging time
time
no iscsi aging time
show iscsi
234
Configuring System Information
Description
To globally enable iSCSI awareness use
the iscsi enable command in global
configuration mode. To disable iSCSI
awareness use the no form of this
command.
To set the quality of service profile that
will be applied to iSCSI flows use the iscsi
cos command. To return to default, use
the no form of this command.
To set aging time for iSCSI sessions use
the iscsi aging time command in global
configuration mode. To cancel aging, use
the no form of this command.
To display the iSCSI settings, use the
show iscsi privileged EXEC command.