When initially enabling an http or https session, enter admin for user name and user1 for password.
NOTE:
Http and Https services require level 15 access and connect directly to the configuration level access.
Configuring Login Banners
You can define 3 types of login banners:
•
Message-of-the-Day Banner: Displayed when the user is connected to the device, before the user has
logged in.
•
Login Banner: Displayed after the Message-of-the-Day Banner, and before the user has logged in.
•
Exec Banner: Displayed after successful login (in all privileged levels and in all authentication methods).
To view and configure login banners:
console# banner motd Welcome
console# show banner motd
console# banner login Please log in
console# show banner login
console# banner exec Successfully logged in
console# show banner exec
Startup Procedures
Startup Menu Procedures
The procedures called from the Startup menu cover software download, flash handling and password
recovery. The diagnostics procedures are for use by technical support personnel only and are not disclosed
in the document.
The Startup menu can be entered when booting the device – a user input must be entered immediately
after the POST test.
To enter the Startup menu:
1 Turn the power on and watch for the auto-boot message.
**************************************************
*****************
**************************************************
------ Performing the Power-On Self Test (POST) ------
52
Starting and Configuring the Device
SYSTEM RESET
*****************