Dell PowerConnect 5424 User Manual page 175

Table 6-37. TACACS+ CLI Commands (continued)
CLI Command
tacacs-server key key-string
tacacs-server timeout timeout
tacacs-server source-ip source
show TACACS [ip-address]
The following is an example of the CLI commands:
Console# show tacacs
Router Configuration
----------- ---------
IP address Status
----------- ---------
12.1.1.2 Not
Connected
Global values
-----------------
TimeOut : 5
Router Configuration
-----------------
Source IP : 0.0.0.0
console#
Description
Specifies the authentication and encryption key for all
TACACS+ communications between the device and the
TACACS+ server. This key must match the encryption used on
the TACACS+ daemon. (Range: 0 - 128 characters.)
Specifies the timeout value in seconds. (Range: 1 - 30.)
Specifies the source IP address. (Range: Valid IP Address.)
Displays configuration and statistics for a TACACS+ server.
----- ---------- ----------
Port Single
Connection
----- ---------- ----------
49 Yes
---------
TimeOut Source IP
---------
1 12.1.1.1
Configuring System Information
---------
Priority
---------
1
175