Dell PowerConnect 5424 User Manual page 320

Defining MST Instances Using CLI Commands
The following table summarizes the equivalent CLI commands for defining MST instance groups as
displayed in the MSTP Settings page.
Table 7-23. MSTP Instances CLI Commands
CLI Command
spanning-tree mst
configuration
instance instance-id
{add | remove} vlan
vlan-range
name string
revision value
spanning-tree mst
instance-id port-
priority priority
spanning-tree mst
instance-id priority
priority
spanning-tree mst max-
hops hop-count
spanning-tree mst
instance-id cost cost
exit
abort
show {current | pending} Displays the current or pending MST region
320
Configuring Device Information
Description
Enters MST Configuration mode.
Maps VLANs to the MST instance.
Sets the configuration name.
Sets the configuration revision number
Sets the priority of a port.
Sets the device priority for the specified
spanning tree instance.
Sets the number of hops in an MST region
before the BPDU is discarded and the
information held for a port is aged.
Sets the path cost of the port for MST
calculations
Exits the MST region configuration mode and
applies configuration changes.
Exits the MST region configuration mode
without applying configuration changes.
configuration.