Displaying the Storm Control Table
1 Open the Storm Control page.
2 Click Show All.
The Storm Control Table opens:
Figure 7-27. Storm Control Table
Configuring Storm Control with CLI Commands
The following table summarizes the equivalent CLI commands for configuring Storm Control as
displayed on the Storm Control page.
Table 7-14. Storm Control CLI Commands
CLI Command
port storm-control include-multicast
port storm-control broadcast enable
port storm-control broadcast rate rate
show ports storm-control [ethernet interface]
Description
Enables the device to count Multicast
packets together with broadcast packets.
Enables broadcast storm control.
Configures the maximum broadcast rate.
Displays the storm control configuration.
Configuring Device Information
291