Port Menu; Set Online State Dialog Box (Online); Port Properties; Node Properties - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Monitoring and Managing the Switch
Figure 2–8: Set Online State dialog box (Online)
2. When the Set Online or Set Offline warning dialog box displays, click OK to set
the switch online or offline.
As the switch goes offline, the word, "OFFLINE," displays in the State field in
the left corner of the Hardware View. As the switch goes online, the word,
"ONLINE," displays in the State field in the left corner of the Hardware View.
When going offline, LED indicators on all ports with attached devices stay green,
but the switch sends offline sequences (OLS) to these devices.

Port Menu

While in the Hardware View, right-click on any port to display the following menu
options.

Port Properties

Click this to display the Port Properties dialog box. This dialog box displays
technical information about the port. See Displaying Port Information on page 2-8 for
more information.

Node Properties

Click this to display the Node Properties dialog box. Note that if a node is not logged
into the port, a message appears indicating that node information is not available. For
details on information that displays in this dialog box, refer to
Properties on page

Port Technology

Click this to display the Port Technology dialog box. This dialog box displays the
following information:
• Port number.
• Connector type: Always LC.
• Transceiver type: Longwave laser LC or shortwave laser LC.
2–16
2–25.
Displaying Node
edge switch 2/24 product manager user guide