Procedure; Configure Feature Key Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring the Switch

Procedure

To configure a feature key, use the following steps:
1. Set the switch offline using the Set Online State dialog box. For help, refer to
Online State on page
2. Select Features from the Configure menu on the menu bar.
The Configure Feature Key dialog box displays.
Figure 3–7: Configure Feature Key dialog box
3. Click New to add a new feature key.
4. In the New Feature Key dialog box, enter the switch's feature key and click OK.
— Feature keys are only valid for a switch with a specific serial number. They
cannot be interchanged between switches. If an error stating "Invalid serial
number" displays, verify that you have entered the feature key that was
assigned to the switch. To verify, check the serial number of the switch
through the Switch Properties dialog box and compare it to the serial number
listed in the documentation provided with your feature key. Refer to
Displaying Switch Information on page 2-12
the Switch Properties dialog box.
— The feature key is a string of alphanumeric characters with dashes. The key is
case-sensitive, so enter the key exactly as printed in the documentation that
you received for the feature. If an error stating "Invalid feature key" displays,
verify that you have entered the feature key correctly.
The Enable Feature Key dialog box displays with a warning, stating that this
action will override the current set of features on the switch. The list in the left
column of the dialog box is a list of features that are active on the switch. The list
on the right is a set of features that come with the new feature key. All of the
features that are active are included in the new feature list.
3–16
5-3.
edge switch 2/24 product manager user guide
for instructions on displaying
Set