If alerts are configured, they will display in table format showing the name of the
alert, type of alert (Rx, Tx, or Rx or Tx), and alert state (inactive or active).
2. Click New.
The New Threshold Alert dialog box displays.
Figure 3–11: New Threshold Alerts dialog box - first screen
3. Enter a name from one to 64 characters in length. All characters in the ISO
Latin-1 character set, excluding control characters, are allowed.
4. Select one of the following from the drop-down list under the Name field:
— Rx Throughput. An alert will occur if the threshold set for receive
throughput is reached.
— Tx Throughput. An alert will occur if the threshold set for transmit
throughput is reached.
— Rx or Tx Throughput. An alert will occur if the threshold set for either
receive or transmit throughput is reached.
5. Click Next.
A new screen appears with additional parameters. The name configured for the
alert appears at the top of the screen.
(Click Previous if you need to return to the previous screen.)
edge switch 2/24 product manager user guide
Configuring the Switch
3–21