HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 34

Product Manager Overview
Threshold Alert(s)
Select this option to configure threshold alerts for ports. A threshold alert notifies
users when the transmit (Tx) or receive (Rx) throughput reaches specified values
for specific switch ports or port types (E_Ports, F_Ports or FL_Ports). Using this
option, you can configure:
• A name for the alert.
• A threshold type for the alert (Rx, Tx, or either).
• Active or inactive state of the alert.
• Threshold criteria. This criteria includes configuring the threshold as the
percent of port traffic capacity utilized (% utilization). You must also
configure the time interval during which the throughput is measured and the
maximum cumulative time that the throughput percentage threshold can be
exceeded during this time interval before an alert is generated.
Export Configuration Report
Select this option to display the Export Configuration Report dialog box, which
enables you to specify a file name in which to save an ASCII text file containing
all current user-definable configuration options in a printable format. Note that
this file cannot be read back into the Product Manager in order to set configuration
parameters.
Enable Web Server
To select this option, place a check mark in the check box to enable the Embedded
Web Server interface on the switch. Select the option again to remove the check
mark and disable the Embedded Web Server interface. When disabled, users at
remote workstations cannot access the interface. If enabled, HP recommends
changing the user names and/or passwords from their default values to prevent
unauthorized access.
Enable Telnet
To select this option, place a check mark in the check box to enable telnet access
to the switch. Select the option again to remove the check mark and disable telnet
access. When disabled, users at remote workstations cannot access the switch
through telnet to use the Command Line Interface (CLI) or perform other tasks. If
enabled, HP recommends changing the user names and/or passwords from their
default values to prevent unauthorized access.
1–18 edge switch 2/24 product manager user guide