Configure Date And Time Periodic Synchronization Dialog Box; Configure Date And Time Manually - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring the Switch
Figure 3–8: Configure Date and Time Periodic Synchronization dialog box
To disable Periodic Date/Time Synchronization, click the check box to remove
the check mark, then click Activate. To re-enable Periodic Date/Time
Synchronization, click the check box to display the check box, then click
Activate.
NOTE: Click Activate to synchronize the date and time at the next update period. Click Sync
Now to synchronize the date and time immediately.
2. Perform one of the following options:
Option 1: To immediately synchronize the switch date and time with the HAFM
server, click Sync Now. Make sure that a check mark is in the Periodic
Date/Time Synchronization check box.
NOTE: If you click Activate, the date and time synchronize at the next update period.
Option 2: To synchronize the switch date and time with a specific date and time
that you enter:
a. Make sure that Periodic Date/Time Synchronization is disabled (no check).
Refer to
Figure 3–9: Configure date and time manually
b. Click in a Date or Time field that you want to change.
3–18
Figure 3–9.
edge switch 2/24 product manager user guide