HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 157

Table A–1: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message
Enterprise Fabric Mode will
be disabled if any of the
following parameters are
disabled: Insistent Domain
ID, Rerouting Delay, Domain
RSCN's. Do you want to
continue?
Error retrieving port
information.
Error retrieving port
statistics.
Error stopping port
diagnostics.
Error transferring files
<message>.
Field cannot be blank.
File transfer aborted.
File transfer is in progress.
Firmware download timed
out.
Firmware file I/O error.
Firmware file not found.
edge switch 2/24 product manager user guide
Description
User attempted to disable
these parameters in the
Configure Switch
Parameters dialog box while
the Edge Switch was online,
but Enterprise Fabric Mode
(SANtegrity feature) is
enabled.
An error occurred while
retrieving port information.
The link is down or busy.
An error occurred while
retrieving port statistics. The
link is down or busy.
An error occurred while
attempting to stop the port
diagnostics from running.
The link is down or busy.
An error occurred while
attempting to download files.
A blank field is not allowed
in this dialog.
User has stopped the file
transfer.
Firmware or data collection
is being transferred.
The switch did not respond
in the time allowed. The
status of the firmware install
operation is unknown.
Firmware file input/output
error occurred.
Firmware file deleted from
the HAFM server.
Product Manager Messages
Action
Click Yes if you want to
continue, and disable
Enterprise Fabric Mode.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation. If the
condition persists, contact
support personnel.
Enter the required
information in the blank field.
N/A. An informational
message.
N/A. An informational
message.
Retry the operation. If the
problem persists, contact
support personnel.
Contact support personnel.
Add firmware to library.
A–7