HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 155

Table A–1: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message
Cannot swap an uninstalled
port.
Click OK to remove all
contents from log.
Continuing may overwrite
host programming.
Continue?
Could not export log to file.
Could not find firmware file.
Could not find firmware file.
Could not remove dump files
from server.
Could not stop port
diagnostics.
Could not write firmware to
flash.
CUP name and port name
are identical.
Date entered is invalid.
edge switch 2/24 product manager user guide
Description
A port swap cannot be
performed when the port is
not installed.
Requesting confirmation
that you want all contents
removed from the log.
Configurations sent from the
host may be overwritten by
HAFM.
A file I/O error occurred. The
log file could not be saved to
the specified destination.
Firmware file selected was
not found in the FTP
directory.
The selected file is not a
firmware file.
Dump files could not be
removed from server. Link
may be down or switch may
be busy.
Port diagnostics could not
be stopped. Link may be
down or switch may be busy.
Firmware could not be
written to flash memory.
Within the address
configuration, one or more
of the port names are the
same as the CUP name.
Date entered incorrectly.
Product Manager Messages
Action
Perform a swap only on a
port that is installed.
Click OK to continue or
Cancel to cancel the
operation.
Continuing will activate the
current configuration.
Ensure filename and drive
are correct.
Ensure file name and
directory are correct.
Obtain a valid firmware file
from your service
representative.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.
Try again. If problem
persists, contact support
personnel.
Make sure all names are
unique for the ports and
CUP name.
Verify that the number of
days in the month is valid.
A–5