Port List View - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Product Manager Overview
For details on menu options, refer to
For details on navigating and monitoring via the Hardware View, refer to
View on page
Port Menu
Double-click a port to display the Port Properties dialog box. Right-click a port to
display the following options:
• Port Properties
• Node Properties
• Port Technology
• Block Port
• Enable Beaconing
• Port Diagnostics
• Clear Link Incident Alert(s)
• Reset Port
• Port Binding
• Clear Threshold Alert(s)
Note that these same options are available when you click a port on the Hardware
View and select the port secondary menu from the Product menu on the menu bar.
NOTE: For Node Properties, if a node is not logged in, a message box displays indicating that
node information is not available.
For details on menu options, refer to
For details on navigating and monitoring via the Hardware View, refer to
View on page

Port List View

Select the Port List view tab. A table listing the port number, port name,
block/unblock configuration, operating state, operating speed, port type, and alert
condition displays in the view panel.
View.
1–24
2-1.
2-1.
Switch Menu on page
Port Menu on page 2-16.
Figure 1–6 shows an example of the Port List
edge switch 2/24 product manager user guide
2-13.
Hardware
Hardware