Configure Threshold Alerts - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

c. Delete characters and enter new ones as required or highlight the existing
character by dragging the mouse cursor over the character and typing the new
character.
NOTE: When entering the hours, use the range of 0 to 23, for minutes and seconds, use the
range of 0 to 59.
d. Click Activate to set the date and time on the switch.
3. If you are finished configuring the switch, back up the configuration data. For
more information, refer to
page 3-29.

Configure Threshold Alerts

A threshold alert notifies users when the transmit (Tx) or receive (Rx) throughput
reaches specified values for specific switch ports or port types, (E_Ports, F_Ports or
FL_Ports).
You are notified of a threshold alert by:
• An attention indicator (yellow triangle) that displays on the port in the Hardware
View.
• An attention indicator (yellow triangle) that displays in the Alert column of the
Port List View.
An attention indicator (yellow triangle) that displays by the Threshold Alerts
field in the Port Properties dialog box.
• Detailed threshold alert data recorded in the Threshold Alert Log.
Use the Threshold Alerts option on the Configure menu to configure the following:
• Name for the alert.
• Type of threshold for the alert (Rx, Tx, or either).
• Active or inactive state of the alert.
edge switch 2/24 product manager user guide
Backing Up and Restoring Configuration Data on
Configuring the Switch
3–19