HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 25

• Configure Fibre Channel operating parameters for the switch, such as BB_Credit,
R_A_TOV, E_D_TOV, preferred domain ID, switch priority, and rerouting delay.
• Configure individual ports with a port name describing the node attached to the
port.
• Configure keys for new features.
• Configure LIN alerts.
• Configure Port Binding.
• Configure Nickname to display instead of World Wide Name (WWN) for the
switch and attached devices.
• Configure SNMP trap recipients and community names.
• Configure Open Systems Management Server Features (if installed).
• Configure the switch name, location, description, and contact person.
• Control individual Fibre Channel ports by blocking/unblocking operation,
enabling link incident (LIN) alerts and WWN binding, setting data speeds, and
running internal and external loopback diagnostics.
• Display FRU properties such as the FRU name, physical position in the switch
(chassis slot number), active failed state, part number, and serial number.
• Display information for individual Fibre Channel ports, such as the port name,
port number, Fibre Channel address, operational state, type of port, and login data.
• Display information on nodes attached to ports.
• Display port performance and statistics.
• Display vital product data for the switch, such as the system name, description,
contact person, location, status, model number, firmware and EC level, and
manufacturer.
• Enable beaconing for ports and the switch unit.
• Monitor the operational status of the switch and each of its hardware
field-replaceable units.
• Perform an initial program load (IPL).
• Perform maintenance tasks for the switch including maintaining firmware levels,
administering the call-home feature, accessing the switch logs, and collecting data
to support failure analysis.
edge switch 2/24 product manager user guide
Product Manager Overview
1–9