Rear View
7. Power Supply Status: Each AC power connector indicates the location of an
internal power supply. An amber, service-required LED indicator is located in the
upper left corner of each AC power connector. The indicator illuminates if the
power supply has failed and requires service. The indicator is off if the power
supply is active.
When a blinking red and yellow diamond ( ) displays on a power connector, like
in
Figure 2–1 on page
this case, the green indicator to the top left of the connector will not illuminate.
When the green indicator is on and no status symbol displays, the power supply is
operational. Note that the switch operates with one power supply failure, however
replace the power supply as soon as possible to retain redundancy.
Obtaining Hardware Information
This section explains how to access the FRU Properties, Port Properties, and
Switch Properties dialog boxes.
Displaying FRU Information
Display the FRU Properties dialog box using one of the following methods:
•
Double-click on a FRU, such as a power supply module illustrated in the
Hardware View.
•
Select a FRU in the Hardware View, then select FRU and FRU Properties from
the Product menu.
•
Double-click on a row in the FRU List view.
The FRU Properties dialog box displays FRU name; slot position relative to identical
FRUs installed in the chassis and active or failed state.
Figure 2–2: FRU Properties dialog box
edge switch 2/24 product manager user guide
2-5, the internal power supply for that connector failed. In
Monitoring and Managing the Switch
2–7