HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 61

• Type
— Gx_port or G_port. This displays if nothing is logged into the port.
— F_Port. This displays if a device is logged into the port.
— E_Port. This displays if the port is connected to another switch's E_Port via
an ISL.
— FL_Port. This displays if a private loop device is logged into the port.
• Operating Speed
This field displays the current data speed for the port as 1 Gb/sec, 2 Gb/sec, or Not
Established. "Not Established" displays if Negotiate was set for the port through
the Configure Ports dialog box and the data speed has not been resolved between
the port and the attached device, or if the port and device are not communicating.
• Port WWN
The port's 16-digit world wide name (WWN).
• Attached Port WWN
The WWN of the node logged into the port.
• Block Configuration
Blocked or unblocked. Operation can be blocked or unblocked through the
Configure Ports dialog box. Refer to
instructions.
• LIN Alerts Configuration
This field indicates whether LIN alerts are enabled or disabled. LIN alerts can be
configured through the Configure Ports dialog box. The default is for the LIN
alerts to be enabled.
• FAN Configuration
Indicates whether Fabric Address Notification (FAN) is On or Off when the port is
operating as an FL_Port.
• Beaconing
This field indicates the beaconing status for the port. To enable or disable
beaconing, right-click the port and select Enable Beaconing.
• Link Incident
Description of the last link incident that occurred on the port.
edge switch 2/24 product manager user guide
Monitoring and Managing the Switch
Configure Ports on page 3–9 for
2–9