Configure Date And Time Periodic Synchronization Dialog Box; Ipl Switch - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Monitoring and Managing the Switch
Clear System Error Light
Select this to turn off the amber system error light (ERR), located below the green
power (PWR) LED on the switch. This also turns off the amber system error light
indicator in the Hardware View (front view)

IPL Switch

Select this option to initiate an IPL on the switch. When the dialog box displays
confirming the IPL, click Yes.
NOTE: An IPL is not intended for ordinary or casual use and should only be performed when
directed by your support personnel.
Refer to Execute an IPL on page 5–1
Set Switch Date and Time
Select this option to display the Configure Date and Time dialog box.
1. Click to display the Configure Date and Time dialog box.
The dialog box displays with a check mark (the default) in the Periodic
Date/Time Synchronization check box. If this field is checked, the HAFM server
periodically sets the switch time to automatically synchronize with the HAFM
server time. Daylight savings time automatically updates on the switch using this
option.
The current date and time display in the Date and Time fields. If the Periodic
Date/Time Synchronization field is checked, the Date and Time fields are
disabled (grayed out).
To enable and disable Periodic Date/Time Synchronization, select the check box
and then click Activate.
Figure 2–5: Configure Date and Time Periodic Synchronization dialog box
2–14
for detailed procedures.
edge switch 2/24 product manager user guide