HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 154

Product Manager Messages
Table A–1: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message
Cannot run diagnostics. The
port is not installed.
Cannot save port
configuration.
Cannot save SNMP
configuration.
Cannot set all ports to
Negotiate due to port speed
restriction on some ports.
Cannot set Fibre Channel
parameters.
Cannot set switch date and
time.
Cannot set switch state.
Cannot set write
authorization without
defining a community name.
Cannot start data collection.
Cannot start port
diagnostics.
A–4
Description
Port diagnostics cannot be
performed when the port is
not installed.
Port configuration cannot be
saved. The link is down or
busy.
SNMP configuration cannot
be saved. The link is down
or busy.
Displays if you try to set all
ports to Negotiate through
the Configure Ports dialog
box and some ports do not
support speed configuration.
Fibre Channel parameters
cannot be set. The link is
down or busy.
Switch date and time cannot
be set. The link is down or
busy.
Switch state cannot be set.
The link is down or busy.
A community name was not
defined in the Configure
SNMP dialog box for the
write authorization selected.
Data collection cannot be
started. The link is down or
busy.
Port diagnostics cannot be
started. The link is down or
busy.
edge switch 2/24 product manager user guide
Action
Run diagnostics only on a
port that is installed.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.
Replace ports that do not
support speed configuration
with those that do support
more than one speed
configuration.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.
Provide a name in the name
field where write
authorization is checked.
Retry the operation later. If
the condition persists,
contact support personnel.
Retry the operation later. If
the condition persists,
contact support personnel.