Node List View - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Product Manager Overview
Note that these options are also available when you click a port row and select the
Port secondary menu from the Product menu on the menu bar.
For details on these menu options, refer to
For details on navigating and monitoring via the Port List View, refer to
View on page

Node List View

Select Node List from view tabs.
Node List View. This view displays a table with information about all node
attachments or N_Ports that have logged into existing F_Ports on the switch. Only
N_Ports display in the Node List View after nodes have logged in to the fabric. The
columns that display in the table include: port number where the node is attached,
node type, WWN of the attached node (device), and BB_Credit used by the attached
node.
Double-click a port row to highlight it and display the Node Properties dialog box for
that port.
Right-click a port row to display the following menu options:
• Node Properties - Displays the Node Properties dialog box.
• Port Properties - Displays the Port Properties dialog box.
• Define Nickname - Displays the Define Nickname dialog box, where you can
define a nickname to display for the attached device instead of the device's 8-byte
WWN.
• Display options - Allows you to display attached devices listed under the Port
WWN column in the Node List View by the device's nickname configured
through the Define Nickname menu option or the device's WWN.
1–26
1-24.
Figure 1–7 on page 1-27
Port Menu on page 2-16.
shows an example of the
edge switch 2/24 product manager user guide
Port List